Dual 24v Battery Isolator 140A with wiring kit

This smart dual battery isolator allows two batteries to be charged from your engine alternator at the same time. When your engine is on and the start battery is sufficiently charged the isolator kit will begin charging the auxiliary battery simultaneously. When the voltage of the start battery drops beneath the cut off voltage(25.6v) for 5 seconds this isolator disconnects the starter battery from your auxiliary circuit. This isolates the start battery and eliminates the possibility of draining it, ensuring that you always have enough charge to start your engine, and also protects sensitive electronic equipment powered from the auxiliary battery from harmful engine start-up spikes. Suitable for Marine, 4WD, caravan and solar applications.  We fit these to motor homes, boats and trade vehicles on a weekly basis.

This listing is for the isolator and complete installation kit.

Specifications:

• Continuous rating: 120A

• Intermittent rating: 140A

• Voltage rating: 24VDC

• Cut in voltage: 26.6V

• Cut off voltage: 25.6V

• Emergency override feature

• LED status indicator

• Ignition Protection:  UL1107/UL1500

• Isolator dimensions: 67 x 67 x 53mm

1 x Dual Battery Isolator with mounting screws

1 x 6 metre length of 8.5mm square red cable terminated at both ends

1 x 60cm 10mm square black earth cable

2 x Positive Marine type battery terminals

1 x Negative Marine type battery terminal

1 x SC25-10 Copper crimp lug

2 x 16-8 Copper crimp lugs

2 x Red heat shrink

6 x 20cm cable ties

Photos of this kit here:  https://flic.kr/p/pkm1dZ  and https://flic.kr/p/pkAtxm

If you need the isolator only, please see our other listing: Dual 24v Battery Isolator 140A

Comes with 12 month RTB Warranty