This DC to DC charger with MPPT Solar from Manson Engineering will charge your 12v battery from either your 12v or 24v starter battery, it has a very wide input voltage range(9-32v). The wide input voltage range and the smart protections take care of the issue due fluctuating alternator voltage control in the green ECU (Engine Control Unit)
The wide input voltage range allows 12V or 24V system to charge your 12V auxiliary battery which can be installed at long distance from the starting battery in your trade or pleasure vehicle.
Charging can be controlled either by the voltage of the starter battery, by the ignition of the vehicle or manually operated.
When both solar and alternator input are connected, the unit will use all of the available solar power then top up from the alternator. Input Solar panel voltage range is 14.5v to 30v open circuit.
The advanced micro-processor control and hardware based protections will give timely input low voltage cut off to protect your starting battery from going flat. 12.8v for 12v battery and 25.6v for 24v battery.
It has three adjustable battery type settings for different types of lead acid batteries (Bulk/Absorption/Float) charging and also a setting for Lithium (LiFePO4) batteries (Bulk/Absorption).
Self Recoverable from Over Temperature, Under Voltage, Overload and Reverse Polarity
Remote display included
Dimension 200 x 130 x 55 mm
Weight 1.0 kg
Your package includes:
1) Manson Engineering DC DC Charger with MPPT Solar
2) Remote display on 2m cable
3) product manual
Comes with 12 month RTB Warranty