Fangpusun 50A 12/24V FAST MPPT Controller

$459.00

SKU: FPCC10 Categories: , Tag:

Description

The 50A 12/24V FAST MPPT Controller from Fangpusun it uses the latest Continuous Maximum Power Point Tracking (MPPT) technology, which seeks out the maximum power available from a solar array.  Voltage stepdown converter to be able to convert high PV voltages down to lower battery voltages of 12 and 24 volts.  Connect a maximum of: 750 watts(@12V) , 1500 watts(@24V)  to your batteries.
Advanced Maximum Power Point Detection MPPT rapidly adjusts to changing weather conditions giving you 10% more power compared to slower MPPT Controllers. And in case of partial shading conditions two or more maximum power points may be present on the power-voltage curve and the greater of these will be found. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. Maximum efficiency exceeds 98%.
Battery Charging
Charge voltage ‘absorption’ Default setting: 14,4V / 28,8V (adjustable)
Charge voltage ‘float’ Default setting: 13,8V / 27,6V (adjustable)
All charging voltages are also individual adjustable in 0.1V increments
Compensates absorption and float charge voltage for temperature
Protections
Over-temperature protection and automatic power derating when temperature is high.
Battery reverse polarity
PV short circuit and PV reverse polarity protection.
PV reverse current protection.
Peak Power range of Solar Module 15-70V @12V , 30-70V @24V
Maximum Open Circuit Voltage of Solar Module Range 100V
Maximum Output Current 50A
Standby power consumption:  less than 20mA
Temperature compensation -16 mV / °C resp. -32 mV / °C
Terminal Size  fit up to 16mm2 cable  AWG5
Operating temperature: minimum -30C maximum 60C
Dimensions (h x w x d) 125 x 186 x 83 mm
Weight 1.6kg

Additional information

Weight 2.5 kg

Reviews

There are no reviews yet.

Be the first to review “Fangpusun 50A 12/24V FAST MPPT Controller”

Your email address will not be published. Required fields are marked *