1KW 24V Wind Turbine with Controller Kit

$2,775.00

SKU: YPTB05 Category: Tags: ,

Description

ind is the perfect complement to solar to allow you to have sufficient energy generation all year round.  Wind is strongest in winter when solar generates less and generally peoples energy consumption is higher.

This kit is off-grid generation and works with a 24v DC battery system.

It’s twisted aerofoil blade design allows high efficiency energy capture from slow moving air (Cp>0.36) allowing significant energy capture in all wind conditions.
Combination of Electromagnetic braking and aerodynamic braking maximizes energy capture by extending turbine’s operating speed range into higher and lower wind speed which are missed by the old style wind turbines. This power curve generated by wind tunnel testing indicated that the blade aerodynamics braking system starts to take effect from 14-15m/s in wind speed, this causes the rotor RPM to be limited within wind turbines rated maximum RPM at even higher wind speeds.  This allows the turbine to run safely in very high wind speeds ensuring you get great generation even in the worst of weather.

 

Maximum Power 1050W
Energy Production  Approx 175 kWh/month at 5.5 m/s
Optimal Operating Environment  Moderate to High Wind Speed
Rotor Diameter 2.4m
Net weight 30kg
Gross weight 37kg
Noise Level <20 dB (5m behind turbine @5m/s gusting)
Blades Quantity 3
Rated Voltage   24V
Blade Material  Nylon fiberglass reinforced composite
Rated rotation speed 750rpm
Start-up Wind Speed 2.4m/s
Cut-in Wind Speed 3m/s
Survival Wind Speed 40m/s (144kph)
Tower connection Flange connection
Strong wind protection mode electromagnetic brake, blades aerodynamic brake

 

User manual is here

 

Turbine Hybrid Controller

Run three phase AC  (4 cables) from your turbine to the controller (located near your batteries), this is a hybrid charger that can also charge batteries from solar up to a rate of 300w.

Rated Battery Voltage  24V
Maximum charging rate 42A
Rated PV Power  300w
Control Mode   PWM
Display Mode  LCD
Unit dimensions  420×420×160mm

This controller has a built in dump load so you will not need to add one.

Turbine Assembly video here

 

 

Additional information

Weight 90 kg

Reviews

There are no reviews yet.

Be the first to review “1KW 24V Wind Turbine with Controller Kit”

Your email address will not be published. Required fields are marked *