(09) 447 1234

[email protected]

Solar Mounting

Grid
List

END CLAMP KIT 35MM

End Clamp Kit 35 mm

End clamp for a 35 mm panel frame, to AS/NZS 1170. Goes at the outside edge of the array, where there is a panel on one side only.

ALUMINIUM TIN INTERFACE KIT

Aluminium Tin Interface Kit

Aluminium interface kit for fixing solar mounting to a metal roof, to AS/NZS 1170. It is the part between the roof and the rail.

INTER CLAMP 35MM

Inter Clamp 35 mm

Inter clamp for 35 mm panel frames, to AS/NZS 1170. Sits between two panels and holds both at once.

STEEL CABLE CLIP

Steel Cable Clip

Steel clip for holding solar cable to the panel frame or rail. Unlike cable ties it does not go brittle and let go.

END CLAMP KIT 35MM

End Clamp Kit 40 mm

End clamp for a 40 mm panel frame, to AS/NZS 1170. Goes at the outside edge of the array, where there is a panel on one side only.

ADJUSTABLE FRONT LEG FOR TIN ROOF

Adjustable Front Leg for Tin Roof

Front leg for a tilted array on a tin roof, to AS/NZS 1170. Holds the low end of the array down while the rear legs set the angle.

RAIL SPLICE KIT

Rail Splice Kit

Splice kit for joining two PV mounting rails end to end, to AS/NZS 1170. For a row that is longer than one rail.

INTER CLAMP 35MM

Inter Clamp 40 mm

Inter clamp for 40 mm panel frames, to AS/NZS 1170. Sits between two panels and holds both at once.

GROUNDING LUG ALUMINIUM

Grounding Lug Aluminium

Aluminium grounding lug for earthing a solar array frame, to AS/NZS 1170. Bolts to the rail and takes the earth cable.

PV MOUNTING RAIL 2560MM

PV Mounting Rail 2100 mm

2100 mm rail for mounting solar panels on a roof, to AS/NZS 1170. The shortest of the four lengths we stock.

PV MOUNTING RAIL 2560MM

PV Mounting Rail 3405 mm

3405 mm rail for mounting solar panels on a roof, to AS/NZS 1170. A longer rail means fewer joins across the array.

PV MOUNTING RAIL 2560MM

PV Mounting Rail 4400 mm

4400 mm rail for mounting solar panels on a roof, to AS/NZS 1170. The longest we stock, for a big array with the fewest joins.

ADJUSTABLE REAR LEG 30-60 DEGREES

Adjustable Rear Leg 30-60 Degrees

Rear leg for tilting a solar array between 30 and 60 degrees, to AS/NZS 1170. Open length 114 cm, closed 63 cm. The steepest of the three ranges.

ADJUSTABLE REAR LEG 30-60 DEGREES

Adjustable Rear Leg 20-40 Degrees

Rear leg for tilting a solar array between 20 and 40 degrees, to AS/NZS 1170. Open length 80 cm, closed 46 cm. The middle of the three ranges.

ADJUSTABLE REAR LEG 15-30 DEGREES

Adjustable Rear Leg 15-30 Degrees

Rear leg for tilting a solar array between 15 and 30 degrees, to AS/NZS 1170. Open length 62 cm, closed 37 cm. The shallowest of the three ranges.

END CLAMP KIT 35MM

End Clamp Kit 50 mm

End clamp for a 50 mm panel frame, to AS/NZS 1170. Goes at the outside edge of the array, where there is a panel on one side only.

Ground Mounting System for 6 large panels (up to 1900w)

Solar Ground Mounting System for 12 large WIDE panels (up to 6000w)

Kitset steel frame for ground mounting 12 wide panels up to 6000W, to AS/NZS 1170.2. Two rows of six portrait, 6.6 by 2.8 m of ground.

INTER CLAMP 35MM

Inter Clamp 50 mm

Inter clamp for 50 mm panel frames, to AS/NZS 1170. Sits between two panels and holds both at once.

Ground Mounting System for 6 large panels (up to 1900w)

Solar Ground Mounting System for 6 large WIDE panels (up to 3000w)

Kitset steel frame for ground mounting 6 wide panels up to 3000W, to AS/NZS 1170.2. Two rows of three portrait, 3.2 by 2.8 m of ground.

Showing all 19 resultsSorted by popularity