(09) 447 1234

[email protected]

cable

Grid
List

High Current Heavy Battery Flex cable 35mm2 270 Amp

Rated 5.00 out of 5

High Current Heavy Battery Flex Cable 50 mm2 500 Amp

50 mm2 flexible welding cable, 500 amps continuous, sold by the metre. 16 mm overall diameter, rated 750V, AWG 0. High strand count for tight bends.

High Current Heavy Battery Flex cable 35mm2 270 Amp

High Current Heavy Battery Flex Cable 35 mm2 350 Amp

35 mm2 flexible welding cable, 350 amps continuous, sold by the metre. 11 mm overall, 750V, AWG 2. For long DC runs from wind, hydro or solar.

High Current Heavy Battery Flex cable 35mm2 270 Amp

High Current Heavy Battery Flex Cable 16 mm2 160 Amp

16 mm2 flexible welding cable, 160 amps continuous, sold by the metre. High strand count for tight bends. 9 mm overall, 750V, AWG 5. Red or black.

High Current Heavy Battery Flex cable 35mm2 270 Amp

High Current Heavy Battery Flex Cable 95 mm2 950 Amp

95 mm2 flexible welding cable, 950 amps continuous, sold by the metre. 18 mm overall, 750V, AWG 000. For the heaviest battery to inverter runs.

120 AMP 60cm Cables

30cm 16 mm2 160 Amp Battery Cables

Pair of 16 mm2 battery cables, 30cm, one red one black, 160 amps continuous. Soldered eye terminals with 8.2 mm holes. Battery to busbar or isolator.

120 AMP 10cm Cable

20cm 16 mm2 160 Amp Battery Cable

16 mm2 single lead, 20cm, 160 amps continuous. A convenient length for dropping a circuit breaker or shunt into a 12V or 24V circuit. Soldered eye terminals.

120 AMP 60cm Cables

60cm 16 mm2 160 Amp Battery Cables

Pair of 16 mm2 cables, 60cm, 160 amps continuous. Long enough for a battery to an inverter in the same locker. Crimped, soldered and heatshrunk.

Kontiki Seahorse torpedo battery cable 40cm

Kontiki Seahorse torpedo battery cable 40cm

2.5 mm2 torpedo cable, 40cm, 25 amps continuous. Built for the Kontiki Seahorse and other fishing torpedoes, where 1 mm2 cable overheats and drops volts.

120 AMP 10cm Cable

10cm 16 mm2 160 Amp Battery Cable

16 mm2 single battery lead, 10cm, 160 amps continuous. Soldered eye terminals both ends, 8.2 mm hole for M8. For close battery to isolator links.

Heavy Battery Cables

60cm 25 mm2 250 Amp Heavy Battery Cables

Pair of 25 mm2 cables, 60cm, 250 amps continuous. The usual choice for a 12V inverter mounted beside its battery. Crimped, soldered and heatshrunk.

160 AMP 200cm Heavy Battery Cables

200cm 25 mm2 250 Amp Heavy Battery Cables

Pair of 25 mm2 battery cables, 2 metres, 250 amps continuous. For an inverter across the compartment from the bank. Check the volt drop for your load.

120 AMP 60cm Cables

160cm 16 mm2 160 Amp Battery Cables

Pair of 16 mm2 battery cables, 160cm, 160 amps continuous. For a van or boat where the solar controller sits away from the battery. Check volt drop first.

short heavy battery cable Red

20cm 25 mm2 250 Amp Heavy Battery Cable

25 mm2 single lead, 20cm, 250 amps continuous. Made for putting a breaker, shunt or isolator into a high current DC circuit. Soldered eye terminals.

short heavy battery cable Red

15cm 25 mm2 250 Amp Heavy Battery Cable

25 mm2 single lead, 15cm, 250 amps continuous. The right length for a battery to a fuse holder or main breaker. Crimped, soldered and heatshrunk.

160 AMP 200cm Heavy Battery Cables

150cm 50 mm2 500 Amp Heavy Battery Cables

Pair of 50 mm2 cables, 1.5 metres, 500 amps continuous. For a large inverter or winch some distance from the battery bank. Crimped and soldered.

Heavy Battery Cables

30cm 25 mm2 250 Amp Heavy Battery Cables

Pair of 25 mm2 heavy battery cables, 30cm, one red one black, 250 amps continuous. Soldered eye terminals with 8.2 mm holes for M8 bolts.

35 AMP 50cm Pair Solar Controller to Battery Cables

100cm 2.5 mm2 25 Amp Pair Solar Controller to Battery Cables

Pair of 2.5 mm2 cables, 1 metre, 25 amps continuous. Battery eye terminals one end, bare wire the other for your solar charge controller.

35 AMP 50cm Pair Solar Controller to Battery Cables

50cm 2.5 mm2 25 Amp Pair Solar Controller to Battery Cables

Pair of 2.5 mm2 cables, 50cm, 25 amps continuous. Eye terminals one end for the battery, bare wire the other for a solar controller's screw terminals.

160 AMP 200cm Heavy Battery Cables

300cm 25 mm2 250 Amp Heavy Battery Cables

Pair of 25 mm2 cables, 3 metres, 250 amps continuous. Our longest 25 mm2 pair. At this run voltage drop matters more than the current rating.

short heavy battery cable Red

20cm 50 mm2 500 Amp Heavy Battery Cable

50 mm2 single lead, 20cm, 500 amps continuous. Heavy enough for a main breaker or shunt on a large 12V or 24V bank. Soldered eye terminals.

160 AMP 10cm Heavy Battery Cable featuring a durable rubber insulation with copper terminals on each end for secure connections.

10cm 25 mm2 250 Amp Heavy Battery Cable

25 mm2 single heavy lead, 10cm, 250 amps continuous. For linking batteries in a bank or bridging to a busbar. Soldered eye terminals, 8.2 mm hole.

120 AMP 60cm Cables

300cm 16 mm2 160 Amp Battery Cables

Pair of 16 mm2 cables, 3 metres, 160 amps continuous. At this length voltage drop decides the size, not the current, so run the numbers first.

35 AMP 100cm Pair Cables

200cm 2.5 mm2 25 Amp Pair Battery Cables

Pair of 2.5 mm2 cables, 2 metres, 25 amps continuous. Eye terminals both ends. For small 12V loads, lights and controllers away from the battery.

120 AMP 10cm Cable

20cm 10 mm2 100 Amp Battery Cable

10 mm2 single lead, 20cm, 100 amps continuous. The cheapest way to put a circuit breaker into a DC circuit. Soldered eye terminals, 8.2 mm hole.

Showing 1–24 of 26 resultsSorted by popularity