(09) 447 1234

[email protected]

Shop

Grid
List

Suntree PV DC Circuit Breaker

Suntree 63A 2Pole Solar PV DC Circuit Breaker OffGrid

63A two pole solar PV DC breaker for a DIN rail, 550V and 6kA. Rated to break DC.

Waveinverter 24V to 12V DC 45A step-down converter, finned aluminium case with mounting holes and colour-coded leads

24V to 12V DC 45A Step-Down Converter

Runs a 12V circuit from a 24V supply.45A continuous.For a whole 12V accessory circuit rather than one appliance.

4500w pure sine wave inverter

NOMAD NPS 4500w Pure Sine Wave Inverter

4500W pure sine wave inverter, 12V. 9000W surge, 90% efficient.

20A PV Solar Panel Fuse (MC4)

20A PV Solar Panel Fuse (MC4)

Inline 20A PV fuse for the positive wire of a solar string. 1000V DC, TUV Rheinland certified, snaps into the MC4 line in seconds.

120 AMP 10cm Cable

10cm 16 mm2 160 Amp Battery Cable

16 mm2 single battery lead, 10cm, 160 amps continuous. Soldered eye terminals both ends, 8.2 mm hole for M8. For close battery to isolator links.

410w OSDASOLAR PERC Monocrystalline Half Cell Solar Panel

410w OSDASOLAR PERC Monocrystalline Half Cell Solar Panel

Maximum power (Pmax) Voltage at max. power (Vmp) Current at max. power (Imp) Open Circuit Voltage (Voc) Short Circuit ...

Copper Bus Bar 1 metre 1500A

Copper Bus Bar 1 metre 1500A

A metre of solid 100% pure electrical copper bar, 30 by 5 mm, good for 1500A. Drill it to suit and build your own.

Suntree Electrical Enclosure 250mm IP66

Suntree Electrical Enclosure 250 mm IP66

Lockable steel enclosure, 250 mm high by 200 wide by 155 deep, IP66 to EN 60529 and IK10 for impact. Mounting plate, M6 earth point and two keys.

Suntree 125A DC Circuit Breaker OffGrid IEC60947-2

Suntree 150A DC Circuit Breaker OffGrid IEC60947-2

150A two pole moulded case DC breaker, 500V and 25kA. Thermal magnetic, and it goes between a large battery bank and the inverter or charge controller.

6MM SINGLE CORE SOLAR CABLE

6 mm Single Core Solar Cable

6 mm2 single core solar cable, 6 mm overall diameter, to AS/NZS 5033:2014. Sold by the metre. The step up from 4 mm once the run gets long.

120w Polycrystalline TNSOLAR Solar PV Panel

120w PERC Mono crystalline Solar Panel

Maximum power (Pmax) Voltage at max. power (Vmp) Current at max. power (Imp) Open Circuit Voltage (Voc) Short Circuit ...

Heavy Battery Cables

60cm 25 mm2 250 Amp Heavy Battery Cables

Pair of 25 mm2 cables, 60cm, 250 amps continuous. The usual choice for a 12V inverter mounted beside its battery. Crimped, soldered and heatshrunk.

12V 10A 3 Stage Battery Charger

Rated 5.00 out of 5

12V 10A 3 Stage Battery Charger

12V 10A three stage charger for AGM, gel and flooded lead acid. Suits a bank of 50Ah to 280Ah. Eye terminals, 13.7V float, 12 month warranty.

Pair of solar 5m array connection cables 4mm grade

Pair of solar 5m array connection cables 4 mm grade

A pair of 5 metre 4 mm2 array leads, MC4 at the panels and bare tails at the controller. Triple shielded, UV resistant and halogen free.

Waveinverter 36V and 48V to 12V DC 10A step-down converter, IP68 sealed aluminium case with mounting holes

48V to 12V DC Step-Down DC Converter 10A

Runs a 12V circuit from a 36V or 48V supply.10A continuous.The smallest of our 48V to 12V converters.

Waveinverter 24V to 12V DC 30A step-down converter, finned aluminium case with mounting holes and colour-coded leads

24V to 12V DC 30A Step-Down Converter

Runs a 12V circuit from a 24V supply.30A continuous.Same footprint as the 20A model, so it drops into the same hole if you're upgrading.

Suntree 125A DC Circuit Breaker OffGrid IEC60947-2

Suntree 100A DC Circuit Breaker OffGrid IEC60947-2

100A two pole moulded case DC breaker, 500V and 25kA. Thermal magnetic, and it goes between a large battery bank and the inverter or charge controller.

Solar MC4 Connectors 2 Pairs

Solar MC4 Connectors 4 mm2 / 6 mm2 – 2 Pairs

Two MC4 pairs for 4 mm2 or 6 mm2 solar cable. Solid copper bar contacts you can solder or crimp, not the winged crimp only sort. 32A at 1000V DC.

Solar 1m extension cable 4mm grade

Solar 2m extension cable 4 mm grade

2 metre 4 mm2 solar extension lead, MC4 on both ends. Triple shielded PVF-1 cable, UV resistant and halogen free.

Suntree 32A 2Pole AC Circuit Breaker OffGrid

Suntree 10A 2Pole AC Circuit Breaker OffGrid

10A two pole AC breaker for a DIN rail, 415V and 6kA. Made to IEC 60947-2 for outdoor and harsh use, not the indoor switchboard standard.

Solar MC4 Connectors 2 Pairs

Solar MC4 Connectors 4 mm2 / 6 mm2 – 4 Pairs

Four MC4 pairs for 4 mm2 or 6 mm2 solar cable. Solid copper bar contacts you can solder or crimp, not the winged crimp only sort. 32A at 1000V DC.

NOMAD 150A DC CIRCUIT BREAKER NMCB

Nomad 150A DC Circuit Breaker Single Pole

150A single pole DC breaker for 12V, 24V or 48V. The size for a 12V 2000W to 2200W inverter. IP67, ignition protected to SAE J1171.

NOMAD 200A DC CIRCUIT BREAKER NMCB

Nomad 200A DC Circuit Breaker Single Pole

200A single pole DC breaker for 12V, 24V or 48V. The size for a 12V 3000W to 3400W inverter. IP67, ignition protected to SAE J1171.

INTER CLAMP 35MM

Inter Clamp 40 mm

Inter clamp for 40 mm panel frames, to AS/NZS 1170. Sits between two panels and holds both at once.

Showing 73–96 of 316 resultsSorted by popularity