(09) 447 1234

[email protected]

Shop

Grid
List

160 AMP 200cm Heavy Battery Cables

300cm 25 mm2 250 Amp Heavy Battery Cables

Pair of 25 mm2 cables, 3 metres, 250 amps continuous. Our longest 25 mm2 pair. At this run voltage drop matters more than the current rating.

Bus bar 300A

Bus Bar 300A 4 Post M8 Wall Mountable Power Distribution Box

300A at 48V on four M8 posts. Nickel plated brass with a write-on label for each circuit, black or red.

Waveinverter 48V to 24V DC 10A step-down converter, IP68 sealed aluminium case with mounting holes

48V to 24V DC Step-Down DC Converter 10A

Runs a 24V circuit from a 48V supply, 38V to 56V input. 10A continuous. For 24V gear on a 48V forklift or machine.

Voltmeter Digital Display Unit

Voltmeter Digital Display Unit

Voltmeter Digital Display unit Excellent way to easy monitor your 12V and 24V battery’s voltage and capacity. Voltage Range: 0 –...

Battery Cable Lug

Cable Lug Terminal 4 mm2

Single tinned copper lug for 4 mm2 cable, 16A continuous, with an M4 eye. Crimp it or solder it.

24v 10A CARSPA 3 Stage Battery Smart Charger

24V 10A CARSPA 3 Stage Battery Smart Charger

CARSPA 24V 10A three stage charger for 24V lead acid, 40Ah to 200Ah. Eye terminals, fan cooled, 29.5V absorption and 27.7V float.

PV DC Isolator Switch 2 Pole with MC4 connectors (AS/NZS certification)

PV DC Isolator Switch 2 Pole with MC4 connectors (AS/NZS certification)

Lockable DC isolator for one solar array, with MC4 tails fitted both sides so it plugs straight in. 32A at 1000V, IP66, AS/NZS certified.

Ultipower 12V 8A Battery Smart Charger

Ultipower 48V 3A Battery Smart Charger

Ultipower 48V 3A seven stage charger for 48V lead acid, 15Ah to 50Ah. Eye terminals, fan cooled, and reverse pulse desulphation on a small pack.

Waveinverter 20V to 60V wide input to 12V DC 5A converter, compact metal shell 54mm long

20V-60V to 12V 5A DC Step-Down Converter

Holds a steady 12V from anything between 20V and 60V in.5A continuous.The smallest converter we stock, 54 mm long.

NOMAD 100A DC CIRCUIT BREAKER NMCB

Nomad 100A DC Circuit Breaker Single Pole

100A single pole DC breaker for 12V, 24V or 48V, rated to 60V. Bolts onto two cables and doubles as the battery switch. IP67 and ignition protected.

Ground Screw Extension 400mm

Ground Screw Extension 400 mm

400 mm extension for a ground screw, 76 mm across with a 200 mm flange, to AS/NZS 1170.2. Adds height after the screw is in.

MUSTPOWER PLUS

12V MUSTPOWER PLUS 2000w pure sine wave inverter with charger

2000W low frequency pure sine wave inverter, 12V, with a 60A battery charger. 6000W surge

Ultipower 12V 8A Battery Smart Charger

Ultipower 36V 3A Battery Smart Charger

Ultipower 36V 3A seven stage charger for 36V lead acid, 14Ah to 65Ah. Alligator clamps, fan cooled, and light enough at 790 grams to carry about.

Car inverter 400w CARSPA

Car inverter 400w CARSPA

400W inverter, 12V. 800W surge.

Ultipower 12V 8A Battery Smart Charger

Ultipower 12V 8A Battery Smart Charger

Ultipower 12V 8A seven stage charger for 12V lead acid, 30Ah to 150Ah. Alligator clamps, fan cooled, and the one to use on a golf trundler battery.

ADJUSTABLE REAR LEG 15-30 DEGREES

Adjustable Rear Leg 15-30 Degrees

Rear leg for tilting a solar array between 15 and 30 degrees, to AS/NZS 1170. Open length 62 cm, closed 37 cm. The shallowest of the three ranges.

short heavy battery cable Red

20cm 50 mm2 500 Amp Heavy Battery Cable

50 mm2 single lead, 20cm, 500 amps continuous. Heavy enough for a main breaker or shunt on a large 12V or 24V bank. Soldered eye terminals.

160 AMP 10cm Heavy Battery Cable featuring a durable rubber insulation with copper terminals on each end for secure connections.

10cm 25 mm2 250 Amp Heavy Battery Cable

25 mm2 single heavy lead, 10cm, 250 amps continuous. For linking batteries in a bank or bridging to a busbar. Soldered eye terminals, 8.2 mm hole.

Solar 1m extension cable 4mm grade

Solar 1m extension cable 6 mm grade

1 metre 6 mm2 solar extension lead with MC4 on both ends. The heavier 6 mm cable, for a higher current array or a long total run.

Waveinverter 36V and 48V to 12V DC 20A step-down converter, IP68 sealed aluminium case with mounting holes

36/48V to 12V DC Step-Down DC Converter 20A

Runs a 12V circuit from a 36V or 48V supply.20A continuous.Twice the 10A, for a full 12V circuit rather than one item.

AC to 24V 20A power supply, fully enclosed metal case with a covered nine way screw terminal strip and an output adjustment terminal

AC to 24V 20A DC Power Supply

Mains to 24V DC, up to 20 amps, 480 watts. Fan cooled with an adjustable output.

12 pack MC4 Solar Connector 2 year warranty

Solar MC4 Connectors 4 mm2 / 6 mm2 – 12 Pairs

Twelve MC4 pairs for 4 mm2 or 6 mm2 solar cable. Solid copper bar contacts you can solder or crimp, not the winged crimp only sort. 32A at 1000V DC.

PASSPOWER 3KW INVERTER CHARGER

PASSPOWER 3000w pure sine wave inverter with charger

3000W low frequency pure sine wave inverter with battery charger. 9000W surge, 89% efficient.

Beam Screw

Beam Screw 865 mm

865 mm beam screw for beams, bearers and decks, to AS/NZS 1170.2. Hot dipped galvanised steel, 76 mm across, and no concrete.

Showing 145–168 of 321 resultsSorted by popularity