PROSTAR 12/24V 30A MPPT Solar Charge Controller

This is the PRTC-3024E  PROFLEX from PROSTAR, it uses the latest Continuous Maximum Power Point Tracking (MPPT) technology, which seeks out the maximum power available from a solar array.  Voltage stepdown converter to be able to convert high PV voltages down to lower battery voltages of 12 and 24 volts.  Connect up to 430 watts(@12V) / 860 watts(@24V) to your batteries.

Maximum Charging Current 30A

MPPT Conversion efficiency >98%

Maximum Open Circuit Voltage of Solar Module Range 100V

Maximum Peak Power Voltage of Solar Module Range 72V

Minimum Solar Voltage  Battery voltage +2V

Select battery type: Lead Acid or Lithium

Three Stage Charger: Bulk, Absorption , Float.  Float and Absorption voltages are adjustable 9-17V.  Battery Charging Equalize available setable 0 – 180 mins

LCD display:  PV Voltage, PV Amp rate, Battery voltage, Battery charge current, voltage of storage battery, Load current, Load Energy consumption logging,

Maximum Current on Load Terminals:  30A

Load terminals are setable to automatically come on for a specified number of hours after sunset, and also if needed, off at sunrise.

PV array short circuit, PV reverse polarity, Output short circuit protection, LV protection for storage battery,   Battery reverse polarity, Over charging protection, Battery over discharge, Load Short circuit, Load overload, Over temperature

Self electricity consumption < 15mA

Cable terminal size up to 16mm2

Dimensions 220 x 154 x 52 mm

Weight 1.2kg