(09) 447 1234

[email protected]

Waveinverter

Grid
List

120w Polycrystalline TNSOLAR Solar PV Panel

120w PERC Monocrystalline Solar Panel

120W PERC monocrystalline solar panel, 19.45V at 6.16A. 3.2 mm glass in an anodised aluminium frame, MC4 leads fitted, 9.0 kg. 25 year warranty.

12V 10A 3 Stage Battery Charger

Rated 5.00 out of 5

12V 10A 3 Stage Battery Charger

12V 10A three stage charger for AGM, gel and flooded lead acid. Suits a bank of 50Ah to 280Ah. Eye terminals, 13.7V float, 12 month warranty.

Pair of solar 5m array connection cables 4mm grade

Pair of solar 5m array connection cables 4 mm grade

A pair of 5 metre 4 mm2 array leads, MC4 at the panels and bare tails at the controller. Triple shielded, UV resistant and halogen free.

Waveinverter 36V and 48V to 12V DC 10A step-down converter, IP68 sealed aluminium case with mounting holes

48V to 12V DC Step-Down DC Converter 10A

Runs a 12V circuit from a 36V or 48V supply.10A continuous.The smallest of our 48V to 12V converters.

Solar MC4 Connectors 2 Pairs

Solar MC4 Connectors 4 mm2 / 6 mm2 – 2 Pairs

Two MC4 pairs for 4 mm2 or 6 mm2 solar cable. Solid copper bar contacts you can solder or crimp, not the winged crimp only sort. 32A at 1000V DC.

Waveinverter 24V to 12V DC 30A step-down converter, finned aluminium case with mounting holes and colour-coded leads

24V to 12V DC 30A Step-Down Converter

Runs a 12V circuit from a 24V supply.30A continuous.Same footprint as the 20A model, so it drops into the same hole if you're upgrading.

Solar 1m extension cable 4mm grade

Solar 2m extension cable 4 mm grade

2 metre 4 mm2 solar extension lead, MC4 on both ends. Triple shielded PVF-1 cable, UV resistant and halogen free.

Solar MC4 Connectors 2 Pairs

Solar MC4 Connectors 4 mm2 / 6 mm2 – 4 Pairs

Four MC4 pairs for 4 mm2 or 6 mm2 solar cable. Solid copper bar contacts you can solder or crimp, not the winged crimp only sort. 32A at 1000V DC.

INTER CLAMP 35MM

Inter Clamp 40 mm

Inter clamp for 40 mm panel frames, to AS/NZS 1170. Sits between two panels and holds both at once.

GROUNDING LUG ALUMINIUM

Grounding Lug Aluminium

Aluminium grounding lug for earthing a solar array frame, to AS/NZS 1170. Bolts to the rail and takes the earth cable.

Ground Screw 1.6m

Ground Screw 2.2m

2.2 m ground screw, 76 mm across with a 200 mm flange, to AS/NZS 1170.2. The longest, for more bonding strength with the earth.

Copper plated Stainless Steel Earthing rod

Copper plated Stainless Steel Earthing rod

Copper plated stainless steel earth rod, 2000 mm long and 14 mm across, brass clamp included. Long enough to be compliant, unlike the 1840 mm ones.

PV MOUNTING RAIL 2560MM

PV Mounting Rail 2100 mm

2100 mm rail for mounting solar panels on a roof, to AS/NZS 1170. The shortest of the four lengths we stock.

AC to 12V 20A power supply, vented metal case with a nine way screw terminal strip, shown with a close-up of the terminals

AC to 12V 20A DC Power Supply

Mains to 12V DC, up to 20 amps, 240 watts. Adjustable output, for 12V setups that are more than a single device.

PV DC Isolator Switch 4 Pole (AS/NZS certification)

PV DC Isolator Switch 4 Pole (AS/NZS certification)

Lockable DC isolator that switches both legs of two separate arrays. 32A at 1000V, IP66, to AS/NZS 3947.3:2001 and IEC 60947-3.

160 AMP 200cm Heavy Battery Cables

200cm 25 mm2 250 Amp Heavy Battery Cables

Pair of 25 mm2 battery cables, 2 metres, 250 amps continuous. For an inverter across the compartment from the bank. Check the volt drop for your load.

Digital LCD Temperature Gauge with 5m probe

Digital LCD Temperature Gauge with 5m probe

This temperature display unit with probe is suitable for measuring and displaying temperature indoors and outdoors, measuring air/water/object temperature. Gr...

Relay with wireless remote control

Relay with wireless remote control

Control power to a device by remote control. Conveniently power your devices on and off with this wireless remote, great for security, generator start, electr...

Electrical Power Usage Meter

Electrical Power Usage Meter

Take the mystery out of where you electricity is disappearing to. Easily calculate the real electrical cost of running appliances for your usage patterns, fin...

Battery-box

Standard Battery Box (up to 95Ah)

Fits 70Ah, 85Ah and 95Ah batteries. Moulded carry handles, webbing strap and tie down brackets included. Suits lead acid, AGM and lithium.

Waveinverter 24V to 12V DC 85A step-down converter, aluminium heatsink with mounting flange and bolted INPUT, GND and OUTPUT terminals

24V to 12V DC 85A Step-Down Converter

Runs a full 12V system from a 24V supply, 18V to 35V input.85A continuous.For a whole vehicle's 12V system. No fan, so nothing to clog or wear out.

PV MOUNTING RAIL 2560MM

PV Mounting Rail 3405 mm

3405 mm rail for mounting solar panels on a roof, to AS/NZS 1170. A longer rail means fewer joins across the array.

Waveinverter 12V to 24V DC 20A step-up booster converter, IP68 sealed aluminium case with mounting holes

12V to 24V DC Step-Up Booster Converter 20A

Supplies a 24V circuit from a 12V supply.20A continuous.Sits between the 10A and the 40A.

120 AMP 60cm Cables

160cm 16 mm2 160 Amp Battery Cables

Pair of 16 mm2 battery cables, 160cm, 160 amps continuous. For a van or boat where the solar controller sits away from the battery. Check volt drop first.

Showing 49–72 of 217 resultsSorted by popularity