(09) 447 1234

[email protected]

Waveinverter

Grid
List

Vehicle solar panel mounting seven piece Kitset

Vehicle solar panel mounting seven piece Kitset

No leak seven piece mounting kit for one panel up to 410W. Four corner and two side ABS mounts, plus an IP67 cable entry with two glands.

Bus bar 300A

Bus Bar 300A 4 Post M8 Wall Mountable Power Distribution Box

300A at 48V on four M8 posts. Nickel plated brass with a write-on label for each circuit, black or red.

Waveinverter 12V to 24V DC 40A step-up booster converter, aluminium heatsink with mounting flange and bolted terminals

12V to 24V DC Step-Up Booster Converter 40A

Supplies a full 24V circuit from a 12V supply.40A continuous.Our largest step-up. No fan, so nothing to clog or wear out.

160 AMP 200cm Heavy Battery Cables

300cm 25 mm2 250 Amp Heavy Battery Cables

Pair of 25 mm2 cables, 3 metres, 250 amps continuous. Our longest 25 mm2 pair. At this run voltage drop matters more than the current rating.

12 pack MC4 Solar Connector 2 year warranty

Solar MC4 Connectors 4 mm2 / 6 mm2 – 12 Pairs

Twelve MC4 pairs for 4 mm2 or 6 mm2 solar cable. Solid copper bar contacts you can solder or crimp, not the winged crimp only sort. 32A at 1000V DC.

Waveinverter 48V to 24V DC 10A step-down converter, IP68 sealed aluminium case with mounting holes

48V to 24V DC Step-Down DC Converter 10A

Runs a 24V circuit from a 48V supply, 38V to 56V input. 10A continuous. For 24V gear on a 48V forklift or machine.

Voltmeter Digital Display Unit

Voltmeter Digital Display Unit

Voltmeter Digital Display unit Excellent way to easy monitor your 12V and 24V battery’s voltage and capacity. Voltage Range: 0 –...

Battery Cable Lug

Cable Lug Terminal 4 mm2

Single tinned copper lug for 4 mm2 cable, 16A continuous, with an M4 eye. Crimp it or solder it.

Waveinverter 20V to 60V wide input to 12V DC 5A converter, compact metal shell 54mm long

20V-60V to 12V 5A DC Step-Down Converter

Holds a steady 12V from anything between 20V and 60V in.5A continuous.The smallest converter we stock, 54 mm long.

Ground Screw Extension 400mm

Ground Screw Extension 400 mm

400 mm extension for a ground screw, 76 mm across with a 200 mm flange, to AS/NZS 1170.2. Adds height after the screw is in.

ADJUSTABLE REAR LEG 15-30 DEGREES

Adjustable Rear Leg 15-30 Degrees

Rear leg for tilting a solar array between 15 and 30 degrees, to AS/NZS 1170. Open length 62 cm, closed 37 cm. The shallowest of the three ranges.

short heavy battery cable Red

20cm 50 mm2 500 Amp Heavy Battery Cable

50 mm2 single lead, 20cm, 500 amps continuous. Heavy enough for a main breaker or shunt on a large 12V or 24V bank. Soldered eye terminals.

160 AMP 10cm Heavy Battery Cable featuring a durable rubber insulation with copper terminals on each end for secure connections.

10cm 25 mm2 250 Amp Heavy Battery Cable

25 mm2 single heavy lead, 10cm, 250 amps continuous. For linking batteries in a bank or bridging to a busbar. Soldered eye terminals, 8.2 mm hole.

Solar 1m extension cable 4mm grade

Solar 1m extension cable 6 mm grade

1 metre 6 mm2 solar extension lead with MC4 on both ends. The heavier 6 mm cable, for a higher current array or a long total run.

Waveinverter 36V and 48V to 12V DC 20A step-down converter, IP68 sealed aluminium case with mounting holes

36/48V to 12V DC Step-Down DC Converter 20A

Runs a 12V circuit from a 36V or 48V supply.20A continuous.Twice the 10A, for a full 12V circuit rather than one item.

AC to 24V 20A power supply, fully enclosed metal case with a covered nine way screw terminal strip and an output adjustment terminal

AC to 24V 20A DC Power Supply

Mains to 24V DC, up to 20 amps, 480 watts. Fan cooled with an adjustable output.

Beam Screw

Beam Screw 865 mm

865 mm beam screw for beams, bearers and decks, to AS/NZS 1170.2. Hot dipped galvanised steel, 76 mm across, and no concrete.

AC to 24V 10A power supply, vented metal case with a 110V and 220V selector switch and a nine way screw terminal strip

AC to 24V 10A DC Power Supply

Mains to 24V DC, up to 10 amps, 240 watts. Adjustable output, doing the work of a 12V 20A on lighter cable.

Anderson Plugs, pair of 50A Grey

Anderson Plugs, pair of 175A Grey

Genderless 175A grey Anderson pair rated 600V, for 25 to 110 mm2 cable. Silver plated copper contacts.

Solar 1m extension cable 4mm grade

Solar 0.5m extension cable 4 mm grade

Half metre 4 mm2 solar extension with MC4 on both ends. For closing a short gap between panels without making up a lead yourself.

Narrow High Current Cable Terminals 95 mm2

Narrow High Current Cable Terminals 95 mm2

Pair of 4.5 mm thick red copper terminals for 95 mm2 cable, 400A. Narrow 16 mm body for tight posts, closed end keeps damp out.

12V 10A 3 Stage Battery Charger

12V 5A 3 Stage Battery Smart Charger

12V 5A three stage charger for AGM, gel and flooded lead acid, 25Ah to 140Ah. Eye terminals and a 13.7V float, and it weighs 600 grams.

Solar 10m twin core array connection cable 6mm grade

Solar 15m twin core array connection cable 6 mm grade

15 metre twin core 6 mm2 array lead, MC4 one end and bare tails the other. Both cores in one sheath, so there is one cable to clip down.

AC to 12V 50A power supply, fully enclosed metal case with a screw terminal strip and an output adjustment terminal

AC to 12V 50A DC Power Supply

Mains to 12V DC, up to 50 amps, 600 watts. Adjustable output, for large 12V loads.

Showing 97–120 of 222 resultsSorted by popularity