(09) 447 1234

[email protected]

Waveinverter

Grid
List

Waveinverter 24V to 12V DC 20A step-down converter, finned aluminium case with mounting holes and colour-coded leads

Rated 5.00 out of 5

24V to 12V DC 20A Step-Down Converter

Runs a 12V circuit from a 24V supply.20A continuous.Aluminium case with mounting holes, fits behind a dash or under a bunk.

Waveinverter 12V to 24V DC 10A step-up booster converter, IP68 sealed aluminium case with mounting holes

12V to 24V DC Step-Up Booster Converter 10A

Supplies a 24V circuit from a 12V supply.10A continuous.Runs a 24V Starlink from a 12V system.

120w Polycrystalline TNSOLAR Solar PV Panel

220w PERC Monocrystalline Solar Panel

220W PERC monocrystalline solar panel, 19.71V at 11.16A. 3.2 mm glass in an anodised aluminium frame, MC4 leads fitted, 11.0 kg. 25 year warranty.

120 AMP 60cm Cables

30cm 16 mm2 160 Amp Battery Cables

Pair of 16 mm2 battery cables, 30cm, one red one black, 160 amps continuous. Soldered eye terminals with 8.2 mm holes. Battery to busbar or isolator.

120 AMP 10cm Cable

20cm 16 mm2 160 Amp Battery Cable

16 mm2 single lead, 20cm, 160 amps continuous. A convenient length for dropping a circuit breaker or shunt into a 12V or 24V circuit. Soldered eye terminals.

Humidity and Temperature Controller (AC powered)

Rated 5.00 out of 5

Humidity and Temperature Controller (AC powered)

Runs humidity and temperature off the one unit, and it is the most accurate thing in the range at ±0.3°C. Suits curing, drying, incubating and glasshouse work...

Ground Screw 1.6m

Ground Screw 0.8m

0.8 m ground screw, 60 mm across with a 200 mm flange, to AS/NZS 1170.2. The shortest of the three lengths.

END CLAMP KIT 35MM

End Clamp Kit 40 mm

End clamp for a 40 mm panel frame, to AS/NZS 1170. Goes at the outside edge of the array, where there is a panel on one side only.

Digital PID Temperature Controller (AC powered)

Digital PID Temperature Controller (AC powered)

PID with self tuning, so it settles on the setpoint instead of swinging either side of it. This is the one for a kiln, a furnace or heat treating, where oversho...

Digital Temperature Controller (AC powered)

Digital Temperature Controller (AC powered)

A plug-in 230V thermostat for a fridge, freezer, glasshouse or fermenting fridge. One NTC probe, a 10A relay, and a range of -40 to 99°C.

Waveinverter 12V to 24V DC 3A step-up converter, IP68 sealed aluminium case with mounting holes

12V to 24V DC Step-Up Converter 3A

Supplies a 24V circuit from a 12V supply.3A continuous.The smallest step-up we stock, for a single 24V accessory.

YPCT13 battery box 335AH battery

Supersize Battery Box

532 mm long by 271 mm wide by 270 mm high inside, so it takes oversize batteries or more than one. Also suitable for burying.

ADJUSTABLE FRONT LEG FOR TIN ROOF

Adjustable Front Leg for Tin Roof

Front leg for a tilted array on a tin roof, to AS/NZS 1170. Holds the low end of the array down while the rear legs set the angle.

Beam Screw

Beam Screw 1400 mm

1400 mm beam screw, the longer of the two, to AS/NZS 1170.2. Hot dipped galvanised steel, 76 mm across, and no concrete to wait on.

120 AMP 60cm Cables

60cm 16 mm2 160 Amp Battery Cables

Pair of 16 mm2 cables, 60cm, 160 amps continuous. Long enough for a battery to an inverter in the same locker. Crimped, soldered and heatshrunk.

30A PV Solar Panel Fuse (MC4)

30A PV Solar Panel Fuse (MC4)

Inline 30A PV fuse for the positive wire of a solar string. 1000V DC, TUV Rheinland certified, snaps into the MC4 line in seconds.

Kontiki Seahorse torpedo battery cable 40cm

Kontiki Seahorse torpedo battery cable 40cm

2.5 mm2 torpedo cable, 40cm, 25 amps continuous. Built for the Kontiki Seahorse and other fishing torpedoes, where 1 mm2 cable overheats and drops volts.

RAIL SPLICE KIT

Rail Splice Kit

Splice kit for joining two PV mounting rails end to end, to AS/NZS 1170. For a row that is longer than one rail.

Waveinverter 24V to 12V DC 45A step-down converter, finned aluminium case with mounting holes and colour-coded leads

24V to 12V DC 45A Step-Down Converter

Runs a 12V circuit from a 24V supply.45A continuous.For a whole 12V accessory circuit rather than one appliance.

20A PV Solar Panel Fuse (MC4)

20A PV Solar Panel Fuse (MC4)

Inline 20A PV fuse for the positive wire of a solar string. 1000V DC, TUV Rheinland certified, snaps into the MC4 line in seconds.

120 AMP 10cm Cable

10cm 16 mm2 160 Amp Battery Cable

16 mm2 single battery lead, 10cm, 160 amps continuous. Soldered eye terminals both ends, 8.2 mm hole for M8. For close battery to isolator links.

Copper Bus Bar 1 metre 1500A

Copper Bus Bar 1 metre 1500A

A metre of solid 100% pure electrical copper bar, 30 by 5 mm, good for 1500A. Drill it to suit and build your own.

Heavy Battery Cables

60cm 25 mm2 250 Amp Heavy Battery Cables

Pair of 25 mm2 cables, 60cm, 250 amps continuous. The usual choice for a 12V inverter mounted beside its battery. Crimped, soldered and heatshrunk.

6MM SINGLE CORE SOLAR CABLE

6 mm Single Core Solar Cable

6 mm2 single core solar cable, 6 mm overall diameter, to AS/NZS 5033:2014. Sold by the metre. The step up from 4 mm once the run gets long.

Showing 25–48 of 217 resultsSorted by popularity