PROSTAR 12/24V 60A MPPT Solar Charge Controller

This is the PRTC-C 6010  PROFLEX from PROSTAR, it uses the latest Continuous Maximum Power Point Tracking (MPPT) technology, which seeks out the maximum power available from a solar array.  Voltage stepdown converter to be able to convert high PV voltages down to lower battery voltages of 12 and 24 volts.  Connect up to 750 watts(@12V) / 1500 watts(@24V) to your batteries.

Maximum Charging Current 60A

MPPT Conversion efficiency>98%

Maximum Open Circuit Voltage of Solar Module Range 100V

Maximum Peak Power Voltage of Solar Module Range 80V

Minimum Solar Voltage  Battery voltage +1V

Select battery type: Lead Acid or Lithium

Four Stage Charger: Bulk, Absorption , Equalization (optional), Float.  Float, Absorption and Equalisation voltages are adjustable 13-15.0V ( x2 for 24v).  Battery Charging Equalize available setable 0 – 180 mins

LCD display:  PV Voltage, PV Amp rate, Battery voltage, Battery charge current, voltage of storage battery, Load current, Load Energy consumption logging,

External Battery Temperature Sensor included  -4.17 mV/C per cell Boost.  Equalisation  -3.33 mV/C per cell Float

Maximum Current on Load Terminals:  30A

Load terminals are setable to automatically come on for a specified number of hours after sunset, and also if needed, off at sunrise.

PV array short circuit, PV reverse polarity, Output short circuit protection, LV protection for storage battery,   Battery reverse polarity, Over charging protection, Battery over discharge, Load Short circuit, Load overload, Over temperature

Self electricity consumption < 8mA

Communication Connection RS-485 Modbus with RJ11

Cable terminal size up to 16mm2  AWG5

Dimensions 262 x 186 x 97 mm

Weight 2.5kg