Description
AODI 24V Sealed IP65 80A Battery Charger
This AODI Charger has a sealed IP65 rated enclosure, shock resistance and suits outdoor, portable, vehicle, workshop and fixed use. Â It has an external battery temperature sensor for temperature compensation to battery charging. Â It is fully automated and has 3 LED display lights to show the battery charging progress.
AC input voltage range: 230V±10%
AC power factor correction ≥0.98
Temperature compensation: ±0.05mV/C (cardinal point: 25)
Full Load Efficiency: 83.2%-92.6%
Dielectric strength ≥2500V (10mA)/min
Insulation resistance ≥100MΩ / 500V
Max noise: 60dB
Environmental Protection Standard: IP65
Shock & Vibration Standard: SAEJ1378
Operating Temperature -20C – 55C
DC terminals: Â eye terminals (8.2mm inside diameter)
Battery Cables length: 1.40m
AC connection: Single phase 16A three pin plug
Dimensions: 162(height) x 280(long) x 200(width) mm
Weight: Â 8.5kg
Comes with 1 year RTB Warranty
Onboard Features
1.Ultra-low frequency composite pulse charging: preventing the sulphation of new batteries, removing the sulphation of old batteries
2.Intelligent temperature compensation, preventing the damage to battery caused by over charging or undercharging, greatly extending the lifespan of the battery
3.Short-circuit Protection:When the charger encounters unexpected short-circuit , it will stop charging. When the fault is removed, the charger will re-start in 10 seconds
4.Thermal self-protection : When the internal temperature of the charger exceeds 75C, the charging current will reduce. If it exceeds 85C , the charger will shutdown. When the internal temperature drops, it will resume charging automatically
5.Reverse Polarity Protection:The charger automatically cuts connections
6.When the input AC voltage is lower than 180V or higher 265V, the charger will shut down protectively and automatically resume working with the voltage is in the normal range again
Reviews
There are no reviews yet.